KIP 5000 User Manual page 146

5.2 Plot Identification
The following features can be used in environments where job costing or department
allocations are required for prints on the KIP 5000. They can also be useful for print
identification and print distribution as this information can be placed in a header.
Unified Accounting – The AutoCad Driver points to a central location Ex. A KIP 5000
which has a centralized list and rules for accounting. For information on how to set
up unified Accounting please see the Request or Print NET sections. NOTE: Unified
Accounting is on by default.
Please see the Appendix for advanced naming variables.
5.2.1 Requester / User Name
This button allows the user to select a predetermined User Name from a drop
down list or manually type a name. This field may be configured to be
mandatory and password protected (see KIP Request Software Guide). The
drop down variables and passwords themselves are also configured in the
Request Software. %Username may be used as an environment variable.
5.2.2 Job Number
This button allows the user to select a predetermined Job Number from a
drop down list or manually type the job number. This field may be configured
to be mandatory and password protected (see KIP Request Software Guide).
The drop down variables and passwords themselves are also configured in
the Request Software.
5.2.3 Description
This button allows the user to select a predetermined Description from a drop
down or manually type a description. This field may be configured to be
mandatory and password protected (see KIP Request Software Guide). The
drop down variables and passwords themselves are also configured in the
Request Software.
5.2.4 Stamp
This button allows a stamp (predetermined in the Request Software) to be
placed on the print(s). The creation and placement of the stamp is preformed
in the request application. (see KIP Request Software Guide)
5-14 Section 5 AutoCAD Driver