Remove/Replace The Flipper Cover - Fargo DTC1000Me Service Manual

Remove/Replace the Flipper Cover

Short Dual-Sided Printing
Module shown
D930010-06
Step Procedure
1
Caution: Turn OFF the Printer and unplug the power cord from the Printer.
Caution: Please be careful not to force any of the snapping parts as they could break with
too much pressure. When replacing the Covers or any parts, do NOT pinch any wires.
2 Remove the Top Cover of the printer.
Remove the Dual-Sided Printing Module from the printer.
November 2013
.
DTC1000Me-1250e-4250e-4500e Card Printer Service Manual PLT-01543 rev 1.0
Tools needed: T10 Torx screwdriver
Estimated Repair Time: 15 min
Preparation: Remove the top cover of the Printer and Dual-Sided Printing
Module from the Printer
Important: This procedure can only be performed by authorized service
personnel.
Short & Tall use common parts
Top cover D930192-01
Top Cover D930192-03
Card Bin D930193-01
Card Bin D930193-03
Flipper Door D930194-01
The Tall Dual-Sided Printing Module uses the Lamination Cover
DTC4250e/4500e
DTC1250e
DTC4250e/4500e
DTC1250e
74