Fargo DTC1000Me Service Manual page 9

Step Procedure
4 Remove the 2 screws (F000178) that hold the side covers to the frame.
5 Remove both side covers. The input and output hoppers are attached to the side covers.
6 Remove the 2 screws on the bottom right and left side to remove the inner back cover.
Left side
7 Lift UP the bottom of this cover to release the upper tabs that hold the cover to the frame.
8 Procedure is complete.
November 2013
.
DTC1000Me-1250e-4250e-4500e Card Printer Service Manual PLT-01543 rev 1.0
Right side
9