Fargo DTC1000Me Service Manual page 40

Step Procedure
11 Fit the Mount behind the tab on the printers side plate frame. This locks the mount in place.
12 Secure the stepper drive assembly with 2 screws (F000171) with 2 washers (140040), and one screw
(F000178) at the specific locations shown.
NOTE: Lightly tighten all screws first then tighten the (F000171) screws last.
November 2013
.
DTC1000Me-1250e-4250e-4500e Card Printer Service Manual PLT-01543 rev 1.0
40