Fargo DTC1000Me Service Manual page 110

DTC1000Me-1250e-4250e-4500e Card Printer Service Manual PLT-01543 rev 1.0
Step Procedure
6 Replace the RFID PCB (A000365-01) Remove the Rewind Assembly as described above.
Remove the Retaining Ring (140048)
Remove the Encoder Wheel (810492)
Slide the RFID PCB to the right. The PCB is held by tab on the left of the frame.
Replace with new PCB A000365-01.
Reverse Assemble.
November 2013
Gear (D920170)
2 screws hold the PCB (A000365-01)
110