Remove/Replace Encoder Sensor (A930514) For Rfid Supply Spindle - Fargo DTC1000Me Service Manual

Remove/Replace Encoder Sensor (A930514) for RFID Supply Spindle

NOTE: For
any other parts (motor/ encoder wheel) REPLACE COMPLETE ASSEMBLY (D930015).
A000365-01
Step Procedure
1
Caution: Turn OFF the Printer and unplug the power cord from the Printer.
2 Remove Supply Spindle-RFID assembly. Refer to:
(D930015) DTC4500e
DTC1250e/4250e
November 2013
.
DTC1000Me-1250e-4250e-4500e Card Printer Service Manual PLT-01543 rev 1.0
Tools needed: Torx screwdriver and flat head screwdriver
Estimated Repair Time: 30 min
Preparation: Remove the Covers
Important: This procedure can only be performed by
authorized service personnel.
RFID Cable
Encoder Sensor Cable
OR Remove/Replace Supply Spindle RFID Motor (D930015)
D930603
D930605
Remove/Replace Supply Spindle RFID Motor
62