Fargo DTC1000Me Service Manual page 99

Step Procedure
B-3 RIGHT ROLLER: Remove the retaining ring (140048) and Gear (8180266).
B-4 Remove the Shaft Bushing. (D900046)
Unlock the shaft bushing (D900046) by turning it counter clock wise.
(TIP: Lift UP on the tab to unlock the pin underneath the tab.)
B-5 Pull out the roller (D920119-01).
B-6 Replace with the new roller (D920119-01).
Use the E CLIP from the old roller. Make NOTE: of how this is placed on the roller.
B-7 Reverse assembly to complete the roller replacement.
November 2013
.
DTC1000Me-1250e-4250e-4500e Card Printer Service Manual PLT-01543 rev 1.0
99