Fargo DTC1000Me Service Manual page 46

Step Procedure
3 Flip printer on front remove Output Roller (D930123) Pull straight up and out
4 Replace with new roller and replace the gear onto the roller.
Procedure completed.
5 Pinch Roller and Spring
Remove the output roller first ( as stated above) and then remove the Pinch Roller
Use a small flathead screwdriver to release the spring (F000338) and the Pinch Roller (D920013).
Replace with new roller.
6 Reverse assembly to reinstall parts.
7 Procedure is complete.
November 2013
.
DTC1000Me-1250e-4250e-4500e Card Printer Service Manual PLT-01543 rev 1.0
46