Astro Machine AstroJet M1 Operator's Manual page 47

4. Disconnect the Ribbon Cable. Slide the Latch
open on the Maintenance Station Circuit Board to
release the Ribbon Cable. Remove the
Maintenance Station.
Remove the Ink Tanks
1. Turn the Printer OFF with the Control
Panel Power Button and open the Front
Cover (hinged at bottom). Unlatch the
three Locks [A] and pull the Ink Tank(s)
out of the Printer.
2. Carefully package the Ink Tanks in the
original packaging.
IMPORTANT: Make sure the ink seals
on the Ink Tanks are facing up to prevent
leakage.
SECTION 4
MAINTENANCE
43