Section 4 - Maintenance; Replacing The Ink Tanks - Astro Machine AstroJet M1 Operator's Manual

SECTION 4
MAINTENANCE

SECTION 4 - Maintenance

This section covers how to care for the Ink Tanks, Printhead Cartridge, Service Station, clear paper jams
and replace the sheet separators.

Replacing the Ink Tanks

Replace the Ink Tanks when the ink runs out.
1. Open the M Series Toolbox. Go to All Programs, open
the Astro Machine Folder and open the Toolbox. On the
Opening Screen you will see System Status information
in the upper left corner.
2. Turn the Printer OFF with the Control
Panel Power Button and open the Front
Cover (hinged at bottom). Open the three
Latches [A] and pull the Ink Tank(s) out of
the Printer.
3. Remove the new Tank(s) from packaging.
4. Slide the new Tank (label up) into its
appropriate color slot [B].
INSTALLATION TIP – Make sure the
Tanks seat properly. Insert the Tank
into the appropriate Ink Station, then
pull the Tank back about an inch and
push forward firmly to insure that the
Ink Nozzles penetrate the seals on the
Ink Tanks.
28