Astro Machine AstroJet M1 Operator's Manual page 21

6. Watch the Toolbox screen on your computer again.
Notice that some of the information is in red. As the
Printer circulates ink and primes the system these
fields should all turn black.
7. When the printer stops processing and all the fields
in System Status are black, the printer is ready for
use. Close the top cover.
NOTE: The Printer may take up to 12 minutes to set
itself up during initial startup. This is normal. The
machine will emit a number of chirps, whirrs and other
noises as it circulates ink and runs systems.
SECTION 2
INSTALLING THE PRINTER
17