Install The Ink Tanks - Astro Machine AstroJet M1 Operator's Manual

SECTION 2
INSTALLING THE PRINTER

Install the Ink Tanks

M Series Printers use a single Printhead Cartridge and five Ink Tanks (two Black, one Cyan, one Magenta,
and one Yellow). Install the Ink Tanks as follows:
1. Open the M Series Toolbox. Go to All Programs, open
the Astro Machine Folder and open the Toolbox. On the
Opening Screen you will see System Status information
in the upper left corner.
2. Open the Front Cover (hinged at bottom).
Open the three Latches [A].
3. Remove the new Tank(s) from packaging.
4. Slide the new Tanks (label up) into their
appropriate color slots [B].
INSTALLATION TIP – Make sure the
Tanks seat properly. Insert the Tank
into the appropriate Ink Station, then
pull the Tank back about an inch and
push forward firmly to insure that the
Ink Nozzles penetrate the seals on the
Tanks.
12