Install The Printhead Cartridge - Astro Machine AstroJet M1 Operator's Manual

SECTION 2
INSTALLING THE PRINTER

Install the Printhead Cartridge

The Printhead Cartridge is a delicate precision device. Handle with extreme care to avoid damage and
issues that could degrade print quality.
 Hold the Printhead Cartridge by the handles ONLY.
 DO NOT touch the ink couplings, nozzle surface or electrical contacts.
 DO NOT unpack the Printhead Cartridge until the Printer is ready for
installation. Once unwrapped, delay in installing the Printhead can
compromise print quality due to dehydration.
 DO NOT place an unwrapped Printhead on any surface before installing.
Protect the Printhead from dust, fibers, dirt and other contaminants at
all times.
1. With the Printer power ON, open the Top
Cover. Press the Printhead Cover Release
Button [1]. The Printer will run a routine, then
the Cover will pop open [2]. NOTE –
Remove the Cap Protectors on the Ink
Nozzles [3]. Be sure to open the Cover fully
to retract the Ink Nozzles.
DO NOT PRY OR MANUALLY LIFT THE PRINTHEAD COVER OR THE COVER
MAY BREAK. ONLY OPEN THE COVER USING THE RELEASE BUTTONS ON
THE PRINTER OR THE PRINTHEAD RELEASE COMMANDS IN THE
SERVICES TAB OR M SERIES TOOLBOX.
14
CAUTION
CAUTION