Astro Machine AstroJet M1 Operator's Manual page 33

5. Turn Printer ON with Control Panel Power Button.
Watch the Toolbox screen on your computer; you will
see the ink colors fill in as the Ink Tanks are installed.
If the ink color does not fill in after a few seconds,
reinstall the Tank.
6. Prime the system by running the Circulate Ink routine
from the User Interface window in the Toolbox.
8. Watch the Toolbox screen on your computer again.
Notice that some of the information is in red. As the
Printer circulates ink and primes the system these
fields should all turn black.
9. When the Printer stops processing and all the fields in
System Status are black, the Printer is ready for use.
10. Latch the three Latches. Close the Front Cover.
The ink in the Ink Tanks may be harmful if
swallowed. Keep new and used Tanks out
or reach of children. Discard empty Tanks
immediately.
Storage
New Ink Tanks should be stored in their original packaging and kept away from heat.
Opened Ink Tanks should remain in the Printer.
Disposal
The Ink Tank may be disposed of in a normal manner.
Clean up spills with soap and water. Abrasive soap is effective in cleaning ink off your hands.
WARNING
SECTION 4
MAINTENANCE
29