Connecting The Astrojet M1; Connecting The Computer - Astro Machine AstroJet M1 Operator's Manual

Connecting the AstroJet M1

Plugging in the Printer
Connect the power cord to the receptacle (1) at the rear of the Printer. The
internal power supply in the Printer is rated 115 to 240VAC, 50/60 Hz.
DO NOT USE AN ADAPTER PLUG OR EXTENSION
CORD TO CONNECT THE PRINTER TO THE WALL
RECEPTACLE.
DO NOT USE OUTLETS CONTROLLED BY WALL
SWITCHES.
DO NOT USE AN OUTLET THAT SHARES THE
SAME CIRCUIT WITH LARGE ELECTRICAL
MACHINES OR APPLIANCES
Connecting to the Computer
The Printer connects to the computer through the USB port (2). A Network
port (3) is provided when operating in a network environment.
Turning Power On and Off
Powering Up Printer:
1. Press the Main Power Switch on the Rear Panel.
2. Press the Power Button on the Control Panel.
Powering Down Printer:
WHENEVER POWERING DOWN UNIT, ALWAYS:
1. PRESS THE POWER BUTTON ON THE CONTROL PANEL.
2. WAIT FOR THE PRINTER TO STOP PROCESSING.
3. THEN PRESS THE MAIN POWER SWITCH ON THE REAR PANEL.
CAUTION
.
CAUTION
SECTION 2
INSTALLING THE PRINTER
7