Power And Network Connection - GeoVision GV-BX110D Quick Start Manual

2.4.2 Power and Network Connection

There are two ways to supply power to the camera:
• Use a Power over Ethernet (PoE) adapter to connect the camera to
the network, and the power will be provided at the same time.
• Use the supplied 3-pin Terminal Block and power adapter (not
supported for GV-MFD110). Follow the steps below to connect the
Terminal Block and power adapter.
1. Insert the black wire of the Mini Fixed Dome (except GV-MFD110) to
the left pin and the red wire to the right pin of the supplied terminal
block.
2. Connect the DC 12V Power Adapter to the 3-Pin Terminal Block.
20