1.3.2 Infrared Illuminators (GV-IR LED / GV-IR LED T2)
1.
Connect the infrared illuminator to the terminal block on the camera.
See I/O Terminal Block, Box Camera chapter, GV-IPCam H.264
User's Manual on the software CD, or GV-IR LED User's Manual.
2.
Access the Web interface of the camera.
3.
Select Video and Motion, select Video Settings, select Streaming 1
and set the IR Check Function option to be Trigger by Input (for
GV-IR LED) or Trigger IR by D/N (for GV-IR LED T2).
GV-IR LED
8