Connecting The Power Cable - GeoVision GV-BX110D Quick Start Manual

3.4.2 Connecting the Power Cable

There are two ways to supply power to the Bullet Camera:
•
Use a Power over Ethernet (PoE) adapter to connect the camera to
the network, and the power will be provided at the same time.
•
Use the supplied 3-pin Terminal Block and power adapter. Follow the
steps below to connect the 3-pin Terminal Block and power adapter.
1. Insert the black wire of the Bullet Camera to the left-side pin of the
3-Pin Terminal Block and the brown wire to the right-side pin.
2. Connect the DC 12V Power Adapter to the 3-Pin Terminal Block.
3
Bullet Camera
31