Connecting The Power Cable - GeoVision GV-BX110D Quick Start Manual

4.4.2 Connecting the Power Cable

There are two ways to supply power to the camera:
•
Use a Power over Ethernet (PoE) adapter to connect the camera to
the network, and the power will be provided at the same time.
•
Use the supplied 3-pin terminal block and power adapter. Follow the
steps below to connect the Terminal Block and the power adapter.
1. Insert the thin black wire of the Vandal Proof IP Dome to the left-side
pin of the 3-Pin Terminal Block and the red wire to the right-side pin.
2. Connect the DC 12V Power Adapter to the 3-Pin Terminal Block.
48