3.4.2 Power and Network Connection
For GV-MFD120 / 130 / 220 / 320 / 520, there are two ways to supply power
to the camera:
• Use a Power over Ethernet (PoE) adapter to connect the camera to
the network, and the power will be provided at the same time.
• Use the supplied Terminal Block and power adapter. Follow the steps
below to connect the Terminal Block and power adapter.
1.
Insert the orange wire of the Mini Fixed Dome (except GV-MFD110) to
the left pin and the yellow wire to the right pin of the supplied terminal
block.
2.
Connect the DC 12V Power Adapter to the Terminal Block.
Terminal Block
3.
Connect the camera to network using a network cable.
34
DC 12V Power Adaptor