4.5.2 Power and Network Connection
For GV-MFD120 / 130 / 220 / 320 / 520, there are two ways to supply
power to the camera:
Use a Power over Ethernet (PoE) adapter to connect the camera to
the network, and the power will be provided at the same time.
Use the supplied 3-pin Terminal Block and power adapter. Follow the
steps below to connect the Terminal Block and power adapter.
1.
Insert the orange wire of the Mini Fixed Dome (except GV-MFD110)
to the left pin and the yellow wire to the right pin of the supplied
terminal block.
Figure 4-14
2.
Connect the DC 12V Power Adapter to the 3-Pin Terminal Block.
3.
Connect the camera to network using a network cable.
4
Mini Fixed & Rugged Dome
Figure 4-15
55