Installation - GeoVision GV-BX110D Quick Start Manual

3.3 Installation

The Bullet Camera is designed for outdoor use and can be mounted on
ceiling and wall.
1. Slide the cable clamp to the camera base.
2. Install the Bullet Camera to the wall / ceiling.
3. Remove the protection sticker from the camera's cover.
4. Connect the power, network and other cables to the camera. See 3.4.
Connecting the Camera in the Quick Start Guide.
5. Access and check the live image from the camera. See 7. Accessing
the Camera in the Quick Start Guide.
6. Adjust the angles of the camera body. Three shafts can be adjusted.
For details, see 3.3.1 Adjusting the Angles in the Quick Start Guide.
7. Loosen the camera's cover, adjust the lens and focus, and insert a
micro SD/SDHC card into the memory card slot. See 3.3.2 Adjusting
Lens and Inserting a Memory Card in the Quick Start Guide.
3
Bullet Camera
23