Installing The Ris Image On A Client System - Sun Microsystems Sun Fire X4150 Installation Manual

■
> Copy cdrom_drive:\drivers\windows\RAID\StorageTEK\2003\amd64\*
D:\remoteinstall\setup\english\images\image_dir\$oem$\textmode
> Copy cdrom_drive:\drivers\windows\chipset\* D:\remoteinstall\
setup\english\images\image_dir\$oem$\$1\drivers\chipset
> Copy cdrom_drive:\drivers\windows\IntelNIC\PRO1000\Winx64\*
D:\remoteinstall\setup\english\images\image_dir\$oem$\$1\drivers\
nic
> Copy cdrom_drive:\drivers\windows\TPM\2003_64\TPM_Driver\*
D:\remoteinstall\setup\english\images\image_dir\$oem$\$1\drivers\
tpm
> Copy cdrom_drive:drivers\windows\Display\2003_64\*
D:\remoteinstall\setup\english\images\image_dir\$oem$\$1\drivers\
video
8. Modify the txtsetup.oem file.
a. In a text editor, open the D:\RemoteInstall\Setup\English\Images\
b. Save and exit the file.
9. Start and stop the Remote Installation Service (BINLSVC) on the RIS server by
typing the following at a command prompt:
net Stop binlsvc
net Start binlsvc
10. Install the image onto your Sun Fire server.
Installing the RIS Image on a Client
System
This procedure describes how to install the RIS image that you created and modified
to a Sun Fire server. Before you perform this procedure, you must configure the RIS
image as described in
82 Sun Fire X4150, X4250 and X4450 Servers Windows Operating System Installation Guide • January 2009
For the Sun StorageTek RAID controller, use the following:
image_dir\$oem$\textmode\txtsetup.oem file.
Where is the directory on the RIS server that contains the RIS image.
image_dir
"Add Drivers to a RIS Image" on page 72.