Sun Microsystems Sun Fire X4150 Installation Manual page 41

11. From the Device Configuration window, select Floppy and/or CD-ROM
according to the delivery method you have chosen.
Floppy Disk Remote: Select Floppy to redirect the server to the contents of the
■
physical floppy drive attached to the JavaRConsole system. This method may
be used if you are installing the Windows Server 2003 on a Sun server
equipped with a RAID controller.
CD-ROM Remote: Select CD-ROM to redirect the server to the operating
■
system software CD/DVD contents from the CD/DVD-ROM drive attached to
the JavaRConsole system.
CD-ROM Image: Select CD-ROM Image to redirect the server to the operating
■
system software .iso image file located on the JavaRConsole system.
Caution – Using the CD-ROM Remote or CD-ROM Image options to install the
Windows Server 2003 or Windows Server 2008 will significantly increase the time
necessary to perform the installation as the content of the CD-ROM is accessed over
the network. The installation duration will depend on the network connectivity and
traffic.
12. When you have made your selections, click Submit.
The devices are mounted and ready for the Windows install.
Proceed to the appropriate chapter for additional operating system installation
instructions.
To install Windows Server 2003, proceed to
■
To install Windows Server 2008, proceed to
■
Chapter 6.
Chapter 7.
Chapter 5 Configure the JavaRConsole System 31