Before You Begin; To Add Drivers To The Wim Image - Sun Microsystems Sun Fire X4150 Installation Manual

Before You Begin

Before creating your WIM image, you need to do the following:
The Windows Automated Installation Kit (Windows AIK or WAIK) must be
■
installed. The kit can be downloaded from Microsoft. Sun recommends using
version 2.0 or later of the WAIK.
Read the Windows AIK documentation.
■
Windows Remote Installation Services must be are running on a Windows Server.
■
Read the Windows Deployment Services snap-in documentation.
Have the latest Tools and Drivers CD/DVD for your server, see
■
Server-Specific Driver Packages" on page
Note – All examples below are for a Sun Fire X4150 server with version 2.1.0 of the
Tools and Drivers CD/DVD. For the Sun Fire X4250 and X4450, the same
instructions apply, but file paths on the Tools and Drivers CD/DVD may differ.

▼ To Add Drivers to the WIM Image

1. Copy all of the appropriate files for a 32-bit or 64-bit Windows installation out
of the version folders on the Tools and Drivers CD/DVD to the appropriate
folder structure on a network share. See
a. Identify the appropriate version files.
The following examples are from the Sun Fire X4150 Server Tools and Drivers
CD/DVD, depending on your server model, the file paths may differ. In the
examples below, cdromdrive is the driver letter of the CD/DVD drive that
contains the Tools and Drivers CD/DVD:
Tools & Drivers CD/DVD Windows Server 2003 32-bit files:
cdromdrive:\drivers\windows\Chipset\win2003
...\Chipset\win2003\SP
...\Chipset\AHCI\2003_32
...\Display\2003_32
...\RAID\LSI\2003_32
...\RAID\StorageTEK\2003
...\TPM\2003_32\TPM_Driver
...\IntelNIC\PROXGB\Win32
...\InetlNIC\PRO1000\Win32
Chapter 9 Incorporate Sun Fire Drivers Into a WIM or RIS Image
7.
Step a and Step b below:
"Download
67