Kernel Error During Reset Hangs Some System Components (6295154); Network Port Does Not Operate At 10 Mbyte/Sec (6302923); System Might Not Initially Mount Iso Image (6276086) - Sun Microsystems Fire X4100 Product Notes

Hide thumbs Also See for Fire X4100:
Table of Contents

Advertisement

Kernel Error During Reset Hangs Some System
Components (6295154)
During service processor reset, such as during flashing or mouse mode changes, an
SP kernel error might occur that leaves the service processor reachable, but which
hangs serial login, SSH, the web GUI, and CLI services.
Workaround
Reset the system using the remaining working service or by powering off the
system.
Network Port Does Not Operate at 10 Mbyte/sec
(6302923)
The service processor Ethernet port operates only at 100 Mbyte/sec. It does not
operate at 10 Mbyte/sec.
Workaround
None.
System Might Not Initially Mount iso Image
(6276086)
If you are installing a RHEL or SLES distribution using the ILOM web GUI and you
unmount an iso image, then try to mount a new image, the first attempt to read the
new image might fail.
Workaround
Mount the new image again. It should mount correctly the second time.
LSI Firmware, Service Processor, and BIOS Issues
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fire x4200

Table of Contents