Installing Windows Server 2003 64-Bit Version Using Ris; To Install Windows Server 2003 64-Bit Using Ris - Sun Microsystems Sun Fire X4150 Installation Manual

b. Comment out the dll files in the [Files.scsi.RAIDClASS] and
c. Save the changes and exit the file.
9. Stop and start the Remote Installation Service (BINLSVC) on the RIS server by
entering the following at a command prompt:
net Stop binlsvc
net Start binlsvc
10. Install the image onto your Sun Fire server.
Installing Windows Server 2003 64-bit Version
Using RIS
Perform the following task to create a Windows Server 2003 64-bit RIS image for
your server.
Note – All examples below are for a Sun Fire X4150 server with version 2.1.0 of the
Tools and Drivers CD/DVD. For the Sun Fire X4250 and X4450, the same
instructions apply, but file paths on the Tools and Drivers CD/DVD may differ.

▼ To Install Windows Server 2003 64-bit Using RIS

1. Install RIS support on a Windows Server 2003 system. For a complete set of
instructions on how to install the RIS on Windows Server 2003 go to
http://support.microsoft.com/default.aspx?scid=kb;en-
us;325862.
2. Install Windows Server 2003 SP1 64-bit on the RIS server:
a. Insert Windows Server 2003 SP1 64-bit CD into the RIS server CD/DVD
b. Type risetup.exe in the Run field.
c. Click Next.
78 Sun Fire X4150, X4250 and X4450 Servers Windows Operating System Installation Guide • January 2009
[Files.scsi.BUSDRV] sections by adding a semicolon at the beginning of
each line.
drive.
The Welcome to the Remote Installation Services Setup Wizard screen
appears.