Installing The Sun Fire 6800 System; Tools - Sun Microsystems Sun Fire 6800 Installation Manual

2
C H A P T E R

Installing the Sun Fire 6800 System

This chapter contains procedures for moving the Sun Fire 6800 system, connecting
the cables, and installing additional hardware.
Tools-page 2-1
Unpacking the Sun Fire 6800 System-page 2-2
Adjusting the Leveling Pads-page 2-5
Connecting Power Cables to the Sun Fire 6800 System-page 2-6
Connecting Network and Interface Cables to the Sun Fire 6800 System-page 2-8
Connecting an Administrative Console to the Sun Fire 6800 System-page 2-9
Note - When you receive your system, leave it in the shipping crate at its final
destination for 24 hours to prevent thermal shock and condensation.
2.1

Tools

Leveling wrench (combination 1/2-inch and 9/16-inch wrench located in the
upper rear of the cabinet)
System keys (both will be attached to either the front or rear door)
2-1