Ann-Audio Options Screen - Honeywell MS-5UD Series Manual

Programming
PROGRAMMING
1=ANN-AUDIO OPTIONS
ANN-BUS Screen #3
86

3.5.5.3 ANN-AUDIO Options Screen

Pressing 1 for ANN-AUDIO Options while viewing ANN-BUS Screen #3 will cause the
following screen to be displayed:
ANN-AUDIO OPTIONS
1=ALL CALL ZONE
This screen shows the Input Zone that has been assigned to be the All-Call Zone. In this
example, Zone 1 is the All-Call Zone. The All-Call Zone can be changed by pressing the 1 key
while viewing the ANN-AUDIO Options Screen. The following screens will be displayed.
1=NO ALL CALL ZONE
2=INPUT ZONE 1
3=INPUT ZONE 2
1=INPUT ZONE 3
2=INPUT ZONE 4
3=INPUT ZONE 5
1=INPUT ZONE 6
2=INPUT ZONE 7
3=INPUT ZONE 8
1=INPUT ZONE 9
2=INPUT ZONE 10
These screens allow the programmer to select which Input Zone will be assigned as the All-Call
Zone.
ANN-AUDIO Options Screen
ANN-AUDIO ALL CALL
Printer Options Screen #1
ANN-AUDIO ALL CALL
Printer Options Screen #2
ANN-AUDIO ALL CALL
Printer Options Screen #2
ANN-AUDIO ALL CALL
Printer Options Screen #3
MS-5UD/MS-10UD Series PN 52626:B 8/01/2008
1