Digital Communicator - Honeywell MS-5UD Series Manual

2.6 Digital Communicator

Two independent telephone lines can be connected to the control panel. Telephone line control/
command is made possible via double line seizure as well as usage of an RJ31X style
interconnection. Note that it is critical that the panel's digital communicator be located as the first
device on the incoming telephone circuit to properly function.
Important! The DACT must not be used to dial a phone number that is call-forwarded.
Network
RJ31X
Service
Jack
Provider's
Facilities
Telephone
Line
Network
Demarcation
Point
The control panel's digital communicator is built into the main circuit board. Connection and
wiring of two phone lines is required as shown below.
MS-5UD/MS-10UD Series PN 52626:B 8/01/2008
Customer Premises Equipment and Wiring
FACP with DACT
Telephone
Answering
System
Figure 2.12 DACT Installation
Figure 2.13 Wiring Phone Jacks
Computer
Unused
RJ-11 Jack
Fax Machine
Telephone
Installation
Telephone
Unused
RJ-11 Jack
33