Deactivating The Detector; User Options Menu - Honeywell GasAlertMicro 5 User Manual

GasAlertMicro 5/PID/IR
User Manual

Deactivating the Detector

To deactivate the detector, press and hold A while it beeps and flashes
to the corresponding countdown.
At the end of the countdown, the detector emits an extended beep and
flash then displays 0 before deactivating.
If A is not held down for the complete countdown, the detector
remains activated.
20
Note

User Options Menu

If the detector is passcode protected, a passcode must be entered to
access the user options menu. For more information, refer to
Protect.
The available user options are as follows:
1. Exit
2. Options: Backlight, confidence beep, due-lock, latch, pass-
code, and safe mode.
3. Sensors: Sensor enable/disable, span gas, STEL period, TWA
method, resolution, % vol CH
calibration, and % vol CO
4. Logger
5. Clock
6. Language: English, French, German, Spanish, and
Portuguese.
7. Tech mode: Sensors, initialize, forced calibration, daily bump
test, stealth, and zero level (CO
Tech mode is not visible in the user options menu. To access
this option, refer to Tech
, correction factor, automatic O
4
, (CO sensor only)
2 2
sensor only).
2
Note
Mode.
Passcode
2