Honeywell MS-5UD Series Manual page 128

Central Station Communications
The table below shows UL listed receivers which are compatible with the MS-5UD and MS-10UD.
Format
0 SIA-DCS-8
1 SIA-DCS-20
2 Ademco Contact ID
1. With 685-8 Line Card with Rev. 4.4d software
2. With 124060V206B and 124063 Line Card Rev. B
3. With version V2.4 Receiver and 126047 Line Card Rev. G
4. With 124077V2.00 Receiver and 126047 Line Card Rev. M
5. With V.7301 Receiver S/W
6. With 01.01.03 Receiver S/W and Line Card 01.01.03
7. With software V1.86
8. With software V1.72
9. With DSP4016 and V1.6 Line Card
10. With software V3.9
IMPORTANT! It is the installer's responsibility to ensure that the Digital Alarm Communicator/
Transmitter is compatible with the Central Station Receiver, utilized by the monitoring service,
prior to installation. The Compatibility Table provides a list of compatible receivers and
associated software versions for the receivers. Changes in the hardware and/or software by the
receiver manufacturers may affect the receiver compatibility with the FACP DACT. After
completing the installation, communication between the DACT and Central Station Receiver must
be tested and verified.
128
Table 5.1 Compatible UL Listed Receivers
MS-5UD/MS-10UD Series PN 52626:B 8/01/2008