Enabled; Nac Coding - Honeywell MS-5UD Series Manual

Programming
NAC #

1=ENABLED

2=CODING
STEADY
NAC Screen #1
68
3.5.2.1 Enabled
Pressing 1 while viewing NAC Screen #1 will cause the display to change to Enabled No. This
will prevent the selected main circuit board NAC from activating its devices. Each press of the
1 key will cause the display to toggle between Enabled Yes and Enabled No.
Note that if a circuit is disabled, a trouble will be logged on the FACP until the circuit is
enabled.

3.5.2.2 NAC Coding

The Coding feature allows the programmer to select the type of output that the main circuit
board notification appliances will generate when activated. Pressing 2 while viewing NAC
Screen #1 will cause the following displays to appear:
1=STEADY
2=MARCH TIME
3=CALIFORNIA
Coding Screen #1
1=TEMPORAL
2=TWO STAGE 3 MIN
3=TWO STAGE 5 MIN
1=SYNC SYSTEM SENSR
2=SYNC WHEELOCK
3=SYNC GENTEX
1=SYNC FARADAY
2=SYNC AMSECO
CODING
CODING
Coding Screen #2
CODING
Coding Screen #3
CODING
Coding Screen #4
MS-5UD/MS-10UD Series PN 52626:B 8/01/2008