Detector Connections & Switch Options - Honeywell SS4-AS Installation Manual And Operating Manual

SECTION 4
DETECTOR CONNECTIONS & SWITCH OPTIONS
4.1
HONEYWELL
Detector Connections
TABLE 1: Stand-Alone Model SS4-A/-A2 Detector
Connectors - Pinouts
J1: DETECTOR INPUT POWER
PIN
1 DC Return ( - )
2 RS-485 Connection to an optional interface unit for
viewing FirePic and TriMode Plot.
3 RS-485 Connection to an optional interface unit for viewing
FirePic and TriMode Plot.
4 Power (+24 Volts DC)
J2: DETECTOR POWER OUT
PIN
1 DC Return ( - )
2 RS-485 Connection to an optional interface unit for viewing
FirePic and TriMode Plot.
3 RS-485 Connection to an optional interface unit for viewing
FirePic and TriMode Plot.
4 Power (+24 Volts DC)
J4: FIRE RELAY
PIN
1 Fire Relay Common
2 Fire Relay Normally Closed
3 Fire Relay Common
4 Fire Relay Normally Open
J5: FAULT RELAY (Energized)
PIN
1 Fault Relay Normally Open
2 Fault Relay Common
3 Fault Relay Normally Closed
4 Fault Relay Common
OPERATOR MANUAL // SECTION 4
DETECTOR CONNECTIONS & SWITCH OPTIONS
J6: FIRE VERIFY RELAY
PIN
1 Verify Relay Common
2 Verify Relay Normally Open
3 Verify Relay Common
4 Verify Relay Normally Closed
25