Installing An S8300 Server Module - Avaya G350 Quick Start For Hardware Installation

Installing an S8300 Server Module

The S8300 can only be inserted in slot V1 on the left side of the Avaya G350 Media Gateway.
1. Remove the plate between slots V1 and V2, labelled "Remove before removing or inserting S8300
module".
2. Remove the blank plate from slot V1.
3. Position the media module squarely before the V1 bay opening and engage both sides of the module
in the interior guides.
4. Slide the S8300 module slowly into the chassis. Maintain an even pressure to ensure that the module
does not become twisted or disengaged from the guides.
Figure 6: Inserting the S8300 Server module.
5. Apply firm pressure to engage the connectors.
6. Tighten the spring-loaded captive screws on the front of the module to lock the S8300 Server module
into the chassis.
7. Replace the plate labelled "Remove before removing or inserting S8300 module" between slots
V1 and V2 and tighten the screws on the front of the plate .
Installing an S8300 Server Module
Issue 6 January 2008 17