Treadmill Lubrication - Trojan Pegasus Instruction Manual

BELT TRACKING ADJUSTMEANT
If during use you notice that walking belt either shifts to the right or the left of center, firstremove "Safety Key" and
unplug equipment from AC power source. Using M6 Allen wrenchprovided, turn left rear roller adjustment as indicated
below clockwise no more the 1/4" of aturn. Remove M6 Allen wrench, insert "Safety Key" and insert AC power cord into
AC outlet.Turn on your treadmill and observe after running a few minutes to see if problem has beencorrected.This may
take several adjustments, so repeat the above procedure.

TREADMILL LUBRICATION

Your treadmill should require little maintenance other then periodically applying lubricant.Lubricating under the treadbelt
will ensure superior performance and extend its life expectancy.
HOW TO CHECK TREADBELT FOR PROPER LUBRICATION?
Lift one side of the treadbelt and feel the top surface of the treadboard.If the surface is slick to the touch, then no further
lubrication is required.If the surface is dry to the touch, apply one packet of lubricant or half of the bottle of lubricant.
HOW TO APPLY LUBRICANT?
1. Lift one side of treadbelt.
2. Pour one half of the lubricant bottle under the center of the treadbelt on the top surface of thetreadboard.
3.Walk on the treadmill at a slow speed for 3 to 5 minutes to evenly distribute lubricant.
NOTE: DO NOT over lubricate treadboard. Any excess lubricant that comes out should be wipedoff.
IMPORTANT: ONLY USE HALF THE BOTTLE OF LUBRICANT PER APPLICATIONLUBRICATION SCHEDULE.
1. After the first 25 hours of use (2-3 months) apply one half bottle of lubricant.
2. Every 50 hours of use (5-8 months) apply one half bottle of lubricant.
1458AU-18