Computer Function - Trojan Pegasus Instruction Manual

COMPUTER FUNCTION

Getting started:
Power the treadmill on by plugging it into an appropriate wall outlet, then turn onthe power switch located at the front
of the treadmill below the motor hood.Ensure that the safety key is installed, as the treadmill will not power on withoutit.
When the power is turned on, all the lights on the display will light for a shorttime.Then the Time and Distance
windows will display Odometer readings for ashort time.The Time window will show how many hours the treadmill has
been inuse and the Distance window will show how many miles (or Kilometers if thetreadmill is set to metric readings)
the treadmill has gone.Then a message willscroll across the dot matrix showing the current software version.The
treadmillwill then enter idle mode, which is the starting point for operation.
1458AU-9