Trojan Pegasus Instruction Manual page 10

COMPUTER FUNCTION
Quick-Start Operation
STEP 1
Press and release theStartkey to wake display up(if not already on).Note:Installing the tether key will also wake up the
console.
STEP 2
Press and release theStartkey tobegin belt movement,at 1.0kmph (0.6 mph), thenadjust to the desired speed using theFast
/ Slowkeys (console or hand rail).You mayalso use the rapid speed keys 2 through 12 to adjust the speed.
STEP 3
To slow tread-belt press and hold theSlowkey (console or hand rail) to the desiredspeed. You may also press the rapid
speed adjust keys, 2 through 12.
STEP 4
To stop the tread-belt press and release theStopkey.
STEP 4
To stop the tread-belt press and release theStopkey.
Pause/Stop/Reset Feature
STEP 1
When the treadmill is running the pause feature may be utilized by pressing theStopkeyonce.This will slowly decelerate the
tread-belt to stop.The incline will go to zero percent.The Time, Distance and Calorie readings will hold while the unit is in
the pause mode.After 5 minutes the display will reset and return to the start up screen.
STEP 2
To resume your exercise, when in Pause mode, press theStart key. The speed and inclinewill return to their previous
settings.Pause is executed when theStopbutton is pressed once. If theStop key is pressed asecond time, the program will
end and a workout summary will be displayed. If theStopbutton is pressed a third time, the console will return to the idle
mode (start up) screen. IftheStop button is held down for more than 3 seconds the console will reset.
Incline Feature
• Incline may be adjusted anytime after belt movement.
• Press and hold theUp / Down keys (console or hand rail) to achieve desired level of effort.You may also choose a more
rapid increase / decrease by selecting desired key, 2 through 12,on left hand side of console (incline).
• The display will indicate incline percent as adjustments are made.
• Incline will remain in it's position when display is turned off.
1458AU-10