Installation Requirements; Tools And Parts - Kenmore 110.4472 Series Use & Care Manual

Compact automatic washer
Table of Contents

Advertisement

Available languages

Available languages

INSTALLATION REQUIREMENTS
Assemble the necessary tools and supplies before beginning the
washer installation. The parts supplied are in the washer basket.
Portable
Installation
(model 110.4472)
Tools needed:
Pliers that open to 19/16 ' ' (3.95 cm)
Utility knife
Flashlight (optional)
Parts supplied:
OO
A
B
C
D
A. Flat washers for faucet adapter and fill hose
B. Silver,double-wire hose clamp (for the bottom of the
drain hose)
C. Faucet adapter
D. Fill-and-drain hose
NOTE: To change a permanent installation to a portable
installation, a kit is required. To order, call your local Sears store
or Sears Service Center. For further information, please call
1-800-4-MY-HOME
® (1-800-469-4663).
Ask for Part Number
3935674.
Permanent
Installation
(model
110.4418)
Tools needed:
Pliers that open to 1%6" (3.95 cm)
Flashlight (optional)
Adjustable or open end wrench %6" (14 mm)
Level
Wood block
Utility knife
Measuring tape
Parts supplied:
O0
oo
E
F
A. Drain hose
B. Silver, double-wire
hose clamp
(for the bottom
of the drain hose)
C. Yellow, single-wire
hose clamp
(for the top of the drain hose)
D. Water inlet hoses (2)
E. Flat water inlet hose
washers (4)
F. Beaded tie strap
NOTE: To change a portable installation to a permanent
installation, a kit is required. To order, call your local Sears store
or Sears Service Center. For further information, please call
1-800-4-MY-HOME
® (1-800-469-4663).
Ask for Part Number
4396746.
Alternate
Parts
Your installation may require additional parts. For ordering
information, call your local Sears store or Sears Service Center.
For further information, please call 1-800-4-MY-HOME
®
(1-800-469-4663).
If You Have:
You Will Need to Buy:
Laundry tub or
Sump pump system (if not already
standpipe taller
available)
than 72" (183 cm)
1" (2.5 cm)
2" (5 cm) diameter to 1" (2.5 cm)
diameter
diameter standpipe adapter, Part No.
standpipe
3363920
Overhead sewer
Standard 20 gal. (76 L) 39" (99 cm) tall
drain tub or utility sink, sump pump and
connectors (available from local
plumbing suppliers)
Floor drain
Siphon break, Part Number 285320;
additional drain hose, Part Number
3357090 and connector kit,
Part Number 285442
Water faucets
2 longer water fill hoses:
beyond reach of
6 ft (1.8 m) Part Number 76314,
fill hoses
10 ft (3.0 m) Part Number 350008
Drain hose too
Drain hose, Part No. 388423 and hose
short
kit, Part No. 285442
Drain hose that is
Hose kit, Part No. 285442
too long
Lint clogged drain
Drain protector, Part No. 367031

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

110.4418 series

Table of Contents