Installation Requirements
Tools and materials needed for installation:
AND
Phillips
screwdriver
Unpacking
Plastic fi lm (lining drum interior) is
removed and discarded. See also
image below.
Leveling
Dryer is level, side-to-side and front-
to-back
Cabinet is setting solid on all corners
240v Electric Supply
Approved NEMA 10-30R or 14-30R
service cord with all screws tight on
terminal block
Terminal access cover/strain relief
installed before initial operation
OR
Optional
Adjustable
universal
pliers
wrench
INSTALLATION CHECKLIST
AND
Carpenter's level
Door Reversal
Follow detailed instructions in this guide
Test hinge and latch for function
Electrical Power
House power turned on
Dryer plugged in
Final Checks
Installation Instructions and Use and Care
Guide read thoroughly
Door latches and drum tumbles when cycle
starts
4
AND
3 or 4-wire
240 volt cord kit