Installation Requirements - Kenmore 110.4443 Series Use & Care Manual

INSTALLATION REQUIREMENTS

Tools and Parts
Gather the required tools and parts before starting installation.
The parts supplied are in the washer basket.
Portable Installation
Parts supplied:
Flat washers for faucet
adapter and fill hoses
Faucet adapter
Hose bracket
Tools needed for installation:
Pliers that open to
1 / " (3.95 cm)
9
16
Flashlight (optional)
4
Silver, double-wire hose
clamp (for bottom of drain
hose)
Fill-and-drain hose
Utility knife
Permanent Installation
Parts needed (not provided with washer):
Inlet hoses with flat washers
Parts supplied:
Drain hose with clamp
Leveling feet
Tools needed for installation
Pliers that open to
1 / " (3.95 cm)
9
16
Flashlight (optional)
Measuring tape
Level
NOTE: Replace inlet hoses
after 5 years of use to reduce
the risk of hose failure.
Record hose installation or
replacement dates for future
reference.
Cable tie
Utility knife
Adjustable or open-end
wrench / " (14 mm)
9
16
Phillips screwdriver