Ossila FACT1 User Manual page 54

enabling
innovative electronics
Lifetime: Data storage volume
Important: You can use external disk partition as well (such as USB memory card, server's volumes
etc). If you use an external memory storage facility, make sure that the connection with the host
computer is stable and reliable so to avoid data acquisition failure due to the peripheral becoming
disconnected and/or irresponsive.
Save advanced settings as default settings
Default settings are loaded by pressing Load Default button on the Advanced SMU and Acquisition
Settings UI
Tip: Once you have determined a reasonably general set of advanced/SMU settings that are
appropriate for the majority of your measurements (such as aperture time, initial settling time etc),
it is good practice to save them as default. However, you should avoid changing the default settings
just because a specific experiment requires so. In this manner, especially when multiple users have
access to the measurement equipment, it will be easier to guarantee consistency between similar
experiments by loading the same advanced/SMU settings.
Ossila Ltd
Data Storage Volume specifies the disk volume
(partition) used as repository for the life data
acquisition. To be used as repository volume, a disk
partition must have at least 1 GB of free space.
Press Default? to save the current settings as default settings and then
press Apply&Close to commit the changes and return the control to
the main UI or, alternatively, press Create Exp to enter a new
experiment settings.
Copyright © 2009-2015 54