Ossila FACT1 User Manual page 23

enabling
innovative electronics
Relay specifications

Initial Contact Resistance: 100 mΩ

Maximum Switching Voltage: 110 V

Maximum Switching Current: 1 A DC

Maximum Switching Power: 30 W

Relay Operate Time: 8 ms
Absolute maximum ratings

Maximum input Drain ( Channel B) Voltage: ± 100 V

Maximum input Gate ( Channel A) Voltage: ± 100 V

Maximum input Drain ( Channel B) Current: 100 mA

Maximum input Gate ( Channel A) Current: 100 mA
Software driver
The Ossila Multiplexer Measurement Unit is controlled by a NI USB 6501 OEM card. The card is
compatible with Linux, Mac OS, Pocket PC and Windows operative system and it can be
programmed by using a variety of languages, such as:

LabVIEW

MATLAB (Data Acquisition toolbox required)

ANSI C

LabWindows/CVI

Measurement Studio

Visual Basic

Visual Studio

Visual Studio .NET
In order for the Ossila Multiplexer Measurement Unit to be recognised by your computer, please
ensure that the National Instruments DAQmx driver version 14 or above is installed on your system.
Many computers running LabVIEW with other national instruments hardware will already have
DAQmx drivers installed and should recognise the board instantly. To check if DAQmx is installed on
a PC, navigate to Start Menu -> All Programs -> National Instruments and look for NI-DAQ.
If DAQmx is not installed on your system, please download and install it from the National
Instruments Website (www.ni.com) where it is available free of charge (registration required).
Physical characteristics

Dimensions: 23 cm (L) x 20 cm (W) x 15 cm (H)

I/O connectors: 1 x USB series B receptacle (cable included), 2 x BNC receptacle

Weight: 4 Kg

USB A/B cable is included.
Ossila Ltd Copyright © 2009-2015 23