Ossila FACT1 User Manual page 44

enabling
innovative electronics
Follow the set of instructions below to programme a simple finite measurement acquisition of a
standard high-density Ossila substrate.
1. On the main front panel, click on Add Settings to open the "Advanced SMU and Acquisition
Settings" UI.
On this UI, in the bottom left corner, locate Lifetime: Data Storage Volume and select which
disk volume (disk partition) to use as data storage repository for Continuous (Lifetime)
experiments. Click on the ring control to see the available disk partitions and select one of
them (D, for example) as lifetime repository.
Note: If you are using NI-PXI 4132, you must also select the appropriate PLC (Power Line
Cycle) located on the SMU Settings setting control cluster of this UI (see
Settings: SMU Settings).
Figure 18. Advanced SMU and Acquisition Settings UI.
Ossila Ltd Copyright © 2009-2015
Application
44