Superfact Ui Front Panels; Advanced Smu And Acquisition Settings - Ossila FACT1 User Manual

enabling
innovative electronics

SuperFACT UI Front Panels

A detailed overview of SuperFACT's three front panel user interfaces.

Advanced SMU and acquisition settings

This UI controls the application and SMU settings.
System settings: OS control
Windows Reboot Time sets the PC reboot time– available in Continuous
Measurement mode only.
Reboot enables/disables the reboot functionality
System settings: Application control
AutoRun enables automatic acquisition functionality whereby a lifetime
experiment is initiated whenever the application is started. Use this
functionally together with reboot to automatically restart a lifetime
acquisition or to initiate at a set date.
Note: SuperFACT is not currently shipped with auto-start functionality; use Windows Time Scheduler
with AutoRun set to ON to automatically start the application and initiate a life time acquisition at a
predetermined time.
Self-Calibration enables/disables SMU self-calibration routine at lifetime acquisition start. This
feature is available for PXI SMU only.
Manual Mode forces the application to operate in manual mode.
Note: When operating in manual mode, multiplexing capabilities are disabled, see
for more details on SuperFACT operation modes.
System settings: E-mail settings
Ossila Ltd
This enables automatic e-mailing functionally whereby errors and
failure messages are e-mailed to the e-mail address specified in
Sender's Email Address. Available in Lifetime mode only.
Copyright © 2009-2015
Operation Mode
51