Scanning Using Twain/Wia - Kyocera FS-1020MFP Operation Manual

Scanning using TWAIN/WIA

This section explains how to scan an original using TWAIN/WIA.
The procedure for scanning using the TWAIN driver is explained as an example. The WIA driver is used in the same way.
1
Place the originals. For details, refer to Loading Originals on page 2-16.
2
Activate the TWAIN compatible application.
3
Select the machine using the application and display the TWAIN screen.
Note For selecting the machine, see the Operation Guide or Help for each
application software.
4
Select scanning settings in the TWAIN screen that opens.
1
2
3
11
The settings that appear in the TWAIN screen are as follows.
No. Item
1 Original size
2 Scan color
3 Resolution
4 6
5 7
15 12
Description
Specify the size of originals being scanned.
Value: Letter, Statement, Executive, A4, A5, A6, B5 (JIS),
B5 (ISO), 16K, Custom
Note Refer to Configuration on page 2-36 for selecting
Custom.
Select the color mode setting.
Value: Monochrome, Grayscale, Full color
Select fineness of scanning resolution.
Value: 200 × 200 dpi, 300 × 300 dpi, 400 × 400 dpi,
600 × 600 dpi
5-5
Scanning
8
9
10
14
13