Selecting The Right Paper - Kyocera FS-1020MFP Operation Manual

Minimum and Maximum Paper Sizes
The minimum and maximum paper sizes are as follows.

Selecting the Right Paper

This section describes the guidelines for selecting paper.
Condition
Avoid using paper that is bent at the edges, curled, dirty, torn, embossed, or contaminated with lint, clay, or paper shreds.
Use of paper in these conditions can lead to illegible printing and paper jams, and can shorten the life of the machine. In
particular, avoid using paper with a surface coating or other surface treatment. Paper should have as smooth and even a
surface as possible.
Composition
Do not use paper that has been coated or surface-treated and contains plastic or carbon. The heat of fusing can cause
such paper to give off harmful fumes.
Bond paper should contain at least 80% pulp. Not more than 20% of the total paper content should consist of cotton or
other fibers.
Paper Sizes
Cassette is available for the paper sizes shown below. The dimensional tolerances are ±0.7 mm for the length and width.
The angle at the corners must be 90° ±0.2°.
• A4 (210 × 297 mm)
• A5 (148 × 210 mm)
• A6 (105 × 148 mm)
• Folio (210 × 330 mm)
• JIS B5 (182 × 257 mm)
• ISO B5 (176 × 250 mm)
• Letter (8-1/2 × 11 inches)
• Legal (8-1/2 × 14 inches)
• Statement (5-1/2 × 8-1/2 inches)
• Executive (7-1/4 × 10-1/2 inches)
Minimum
Paper Size
70 mm
(2-3/4 inches)
Maximum
Paper Size
216 mm (8-1/2 inches)
2-5
Preparation