Paper Type; Preparing The Paper - Kyocera FS-1020MFP Operation Manual

Paper Type

The machine is capable of printing under the optimum setting for the type of paper being used.
Not only can preset paper types be selected, but it is also possible for you to define and select customized paper types.
Paper type can be changed using the printer driver and KYOCERA Client Tool. The following types of paper can be used.
Paper Type
Plain
Preprinted
Labels*
Bond
Recycled
Vellum*
Rough
Letterhead
* One sheet must be loaded at a time.
** This is a paper type defined and registered by the user. Up to eight types of user settings may be defined. For
more information, refer to KYOCERA Client Tool User Guide.

Preparing the Paper

After removing paper from the packaging, fan through the sheets to separate them prior to loading.
If using paper that has been folded or is curled, straighten it prior to loading. Failure to do so may result in a paper jam.
IMPORTANT Ensure paper is not stapled and clips are removed.
You should not use inkjet printer paper or any paper with a special surface coating. (Such papers may cause paper
jams or other faults.)
Paper Weight Displayed in
KYOCERA Client Tool
Normal 2
Normal 2
Heavy 1
Heavy 1
Normal 2
Light
Heavy 1
Normal 2
Paper Type
Color
Prepunched
Envelope*
Cardstock*
Thick
High quality
Custom 1 (to 8)**
2-11
Preparation
Paper Weight Displayed in
KYOCERA Client Tool
Normal 2
Normal 2
Heavy 2
Heavy 2
Heavy 2
Normal 2
Normal 2