Kyocera FS-1020MFP Operation Manual page 51

Quick Scan Settings
No. Item
5 Original image
6 Destiny
7 Reverse image
8 Reset
9 Help
10 OK/Close
1
4
5
No. Item
1 Output name
2 File format
3 Quality
4 Preferences
5 OK/Cancel/Apply Clicking OK exits the Quick Scan Settings after applying the
Description
Select original image type for best results.
Value: Text, Photo, Text+Photo
Select the density.
Value: -3 (Lighter) to 3 (Darker)
When this is selected, the image color reverses.
Reset the settings to the previous settings.
Displays the Help screen.
Clicking OK exits the TWAIN Settings after applying the modified
scan settings.
Clicking Close exits the TWAIN Settings without applying the
modified scan settings.
Description
Assign a document name to scanned images. When multiple
images are saved in the same folder, a three-digit incrementing
number such as Scan_001, Scan_002... is appended to the end of
the file name. Up to 16 characters can be entered.
Specify the image file format.
Value: BMP, JPEG, PNG, TIFF, PDF
Note In Scan to PDF, all images are saved in PDF format.
Set the image quality if File format is JPEG. The higher quality
becomes the lower compression. This is disabled for non-JPEG
format.
Value: 1 to 100
Note Non-numeric characters cannot be entered. If entered
number is beyond range, the max/min value will be restored.
Displays the TWAIN settings screen. For detail, refer to TWAIN
Settings on page 2-34.
modified scan settings.
Clicking Cancel exits the Quick Scan Settings without applying the
modified scan settings.
Clicking Apply applies the modified scan settings without exiting
the Quick Scan Settings.
2-35
Preparation
2
3