Kyocera FS-1020MFP Operation Manual page 11

About the Operation Guide
This Operation Guide contains the following chapters:
1 Machine Parts
This chapter lists the names of different machine parts.
2 Preparation
This chapter explains how to start up the machine, load paper and originals, and use the application software included in
the Product Library disc.
3 Copying
This chapter explains the functions you can use when copying.
4 Printing
This chapter explains the printing procedure from an application software.
5 Scanning
This chapter explains the functions you can use when scanning originals.
6 Maintenance
This chapter explains how to replace the toner container and how to care for your machine.
7 Troubleshooting
This chapter explains how to handle machine problems that may occur, such as paper jams.
8 Appendix
This chapter lists the machine specifications.
Conventions in This Guide
This manual uses the following conventions.
Convention
Description
Italic Typeface Used to emphasize a key word, phrase
or reference to additional information.
Bold Used to denote buttons on the
software.
Bracket Bold Used to denote operation panel keys.
Indicates characters entered in the
Courier
display on the operation panel.
Note Used to provide additional or useful
information about a function or feature.
Important Used to provide important information.
Caution Used to suggest mechanical damage
as a result of an action.
Warning Used to alert users to the possibility of
personal injury.
Example
Refer to Connections on page 2-2.
To start printing, click OK.
Press [Start] to start copying.
1- appears in the display on the operation panel.
Note Do not remove the toner container from the
carton until you are ready to install it in the machine.
IMPORTANT Take care not to touch the drum and
transfer roller (black) during cleaning.
CAUTION When removing a paper jam, pull the paper
gently so as not to tear it. Torn pieces of paper are difficult
to remove and may be easily overlooked, deterring the
paper jam recovery.
WARNING If you are shipping the machine, remove and
pack the developer unit and drum unit in a plastic bag and
ship them separately from the machine.
ix